Yale GP300-360EF

In heavy duty applications, you need a lift truck with the power to get through the toughest challenges while avoiding high running costs.

• Cummins turbo diesel engine pairs with ZF WG 161 transmission, optimized for maximum performance and fuel economy
• The Tier 4 Final after-treatment package offers cooled Exhaust Gas Recirculation (EGR), a Selective Catalytic Reduction system (SCR) for NOx reduction, a Diesel Oxidation Catalyst (DOC) for Particulate Matter (PM)
  removal, and a Diesel Exhaust Fluid (DEF) dosing module
• ECO Modes control maximum engine RPM and throttle response for balance of performance and fuel savings
• On-demand hydraulic system can result in 10% lower fuel consumption - $2,250 per year at $2.50/gal
• Empty seat engine shutdown turns off the truck when the operator is out of the seat for a selectable 3-15 minute window, limiting idle hours on the truck
• On-demand cooling uses viscous drive cooling fan that draws power only when cooling is required - unlike a direct drive fan

The GP-EF series is designed to keep operators comfortable and focused, for lasting productivity.

• Low step heights for easy entry and exit
• Low noise thanks to vibration dampeners for the powertrain
• High, open carriage and mast sections offer unobstructed view of fork tips
• Optional foot directional control pedal for quicker, smoother control of travel direction
• Optional Accutouch mini-lever e-hydraulic controls accompany the adjustable armrest for low-effort, fingertip control of hydraulic functions and horn

The GP-EF series delivers the performance you need to meet the highest performance benchmarks in tough duty cycles.

• Automatic throttle up provides automatic response to lift inputs from the operator when the lift lever is activated, with a controlled rev-up to keep the engine in the most efficient operating range
• Maximum travel speed of 17 mph, with or without load present
• Fast lifting speeds of 81 ft/min with load and 91 ft/min without load present
• Lowering speeds of 98 ft / min with load and 94 without load present

The GP-EF series offers the build quality, smart features and serviceability to keep performing, shift after shift.

• Sideways tilting cab offers unobstructed access to the engine and key components
• CAN bus connections help to reduce fault identification time
• Longer service intervals increase uptime and reduce service costs. LSH oil change is up to 6,000 hours, transmission oil change interval is 2,000 hours.
• Sturdy mast design with less deflection than comparable overhead tilt products
• Engine protection system monitors coolant, air intake temperatures and oil pressure
• Transmission system monitors pressure, temperature and forward/reverse lockout during changes in direction
• Efficient hydraulic system does not require engine speeds to run as high to extend component life
• Quad-cooler radiator design channels only cool air, not preheated air, across cores